Lesson 16 GY-521 Module

Uncategorized 1 Minute

We used one Elegoo Uno R3, one GY-521 module and 4 F-M wires, then we finished the following connection:

For this connect the pin labelled as SDA on the GY-521 to the Drduino’s pin 4 (SDA). And the pin labelled as SCL on the GY-521 to the Arduino’s analog pin 5(SCL). And that’s it.
result from the original code.
Original delay was 333, and we changed it to 1000.
Unknown's avatar

Published by neha0407

Published

Leave a comment