Lesson 28 Four Digital Seven Segment display

Here in the lesson, we will use 1 elegoo uno R3, 1 830 tie-points breadboard, 1 74HC595 IC, 1 4 digital 7-segment Display, 4 220 ohm resistors and 23 m-m wires.

with the help of codes with were able to display these numbers in the 4 digital seven segment display.

Lesson 27 74HC595 and segment display

here in this lesson we will use 1 elegoo uno R3, 1 830 tie-points breadboard, 1 74HC595 IC, 1 gigit 7- segment display, 8 220 ohm resistors and 26 m-m jumper wires.

with the help of the given codes we were able to display the segments. it was changing so fast, we tried getting all the numbers. but we could captured only 1 3 4 and 8 as shown in the pictures

Lesson 26 Photocell

In this lesson we will use 1 elegoo uno r3, 1 830 tie points Breadboard, 8 leds, 8 220 ohm resistors, 1 1k ohm resistor, 1 74hv595 IC, 1 photoresistor and 16 m-m jumper wires.

with the help of codes we were abele to turn the leds on but we can observe that the intensity of the light has decreased from green to yellow.

Lesson 25 The serial monitor

With the help of the set up we used in the lesson 24 we will make some changes with the lighting of the leds.

Lesson 24 Eight LED 74HC595

in this lesson we use 1 elegoo uno R3, 1 830 tie points breadboard, 8 leds, 8 220 ohm resistors, 1 74hc595 ic and 14 m-m wires.

with the given code we were able to light up all the leds.

Lesson 20 – Sound sensor module.

the materials we used: 1 elegoo Uno R3, 1 sound sensor module and 4 f-m dupont wires.

Here the uno is connected to the sound sensor module with the help of 4 f-m Dupont wires.

the result with the help of the codes.

Lesson 19- Real time clock module

The materials used in the experiment: 1 elegoo uno, 1 RTC module, and 4 f-m dupont wires.

in the picture above the elegoo is connected with the RTC modulw with the help of f-m dupont wires.

with the code we could display the date and time in the monitor.

Lesson 21 RC522 RFID Module

The materials we used in this experiment are: 1 elegoo uno R3, 1 RC522 RFID module and 7 f-m dupont wires.

In the above picture, uno is connected with the module with the help of f-m dupont wire

When we upload the given code we got the result as above.

Lesson 23 Thermometer

In this lesson we will use 1 elegoo uno R3, 1 LCD1602 module, 1 10k ohm resistor, 1 thermistor, 1 potentiometer, 1 830 tir points Breadboard and 18 m-m jumper wires.

With the given code the LCD displayed the temperature in celsius only but we changed some of the codes and make the LCD display the temperature in both celsius and Fahrenheit.